Torn screen mesh
The screen could no longer keep insects out reliably.
Real North County project
Torn mesh. Same beige frame. Fresh charcoal mesh.
This was a rescreening job—not a frame repair and not a newly built screen. The damaged mesh was removed and replaced with standard charcoal fiberglass.
Existing frame reused
The beige frame still fit and remained serviceable, so a replacement frame was unnecessary.
Charcoal fiberglass
The practical standard material for everyday insect protection and airflow.
Why rescreening made sense
Repair the failed part, not everything around it.
The mesh was torn, but the frame did not need replacement. Keeping the frame reduced unnecessary material and gave the customer the repair the screen actually needed.
Homeowner lesson: a tear does not automatically mean you need a complete screen built to fit. Clear photos of the full frame and damaged area help Zac judge the likely repair before scheduling.
01 · Set up
The worktable holds the frame steady.
The larger silver structure is Zac's adjustable worktable and jig. It supports the customer's beige screen frame while the mesh is changed.
02 · Remove
The torn mesh comes out of the existing frame.
The damaged screen material and spline are lifted from the groove so the serviceable frame can be prepared for fresh mesh.
03 · Rescreen
New charcoal fiberglass is secured in place.
The replacement mesh is worked into the frame groove carefully so it sits evenly without turning a straightforward rescreen into an unnecessary frame replacement.
04 · Finish
Excess mesh is trimmed from the perimeter.
Once the mesh is secured, the extra material is trimmed neatly along the frame for a clean finished edge.
Finished result
The frame stayed. The torn mesh did not.
The completed screen has fresh charcoal fiberglass mesh while the customer's serviceable beige frame remains in use.
Get an EstimateLearn about rescreening →